DT Swiss
Replacement crown adjust damping control hardware for DT Swiss O.D.L suspension forks. Can be used to convert a remote-controlled fork to crown adjust.
Replacement external rebound adjuster for 29 inch DT Swiss suspension forks.
Replacement external rebound adjuster for 27.5 or 26 inch DT Swiss suspension forks.
Dedicated low pressure sealant for optimum performance in tyres run at under 60 PSI. Offroad formulation designed to quickly seal holes up to 6mm. Ammonia and latex free. larger 1000 ml bottle for regular tubeless users.
Dedicated low pressure sealant for optimum performance in tyres run at under 60 PSI. Offroad formulation designed to quickly seal holes up to 6mm. Ammonia and latex free. 240 ml bottle, enough for 2 high-volume 20 x 2.
Dedicated high pressure sealant for tyres run at 58 - 108 PSI. Thicker particles are designed to better contain the pressure, allowing the fluid to complete a secure seal quickly on holes up to 3mm. Will not degrade with C02 use.
Essential for rebuilding DT's premium PHR system rims. Only to be used with DT's PHR system washers. The convex Pro-Head nipples pivot freely in order to align perfectly with the spoke, creating a stiffer, stronger wheel with no weight penalty.
Freed from UCI regulation, the DT Swiss Gravel range was free to go as wide as DT's test data suggested, after extensive testing of different tyre profiles and rim shapes, DT engineers have settled on a full 24 mm as the perfect width.
Freed from UCI regulation, the DT Swiss Gravel range was free to go as wide as DT's test data suggested, after extensive testing of different tyre profiles and rim shapes, DT engineers have settled on a full 24 mm as the perfect width.
Freed from UCI regulation, the DT Swiss Gravel range was free to go as wide as DT's test data suggested, after extensive testing of different tyre profiles and rim shapes, DT engineers have settled on a full 24 mm as the perfect width.
Freed from UCI regulation, the DT Swiss Gravel range was free to go as wide as DT's test data suggested, after extensive testing of different tyre profiles and rim shapes, DT engineers have settled on a full 24 mm as the perfect width.
With over half the Downhill World Cup pits running DT wheel components, no one else has more experience and knowledge in making dedicated DH race hoops.
With a mighty 81mm external width the BR (Big Ride) 710 fat bike rim is ideal for even the biggest, floatiest of rubber.
Designed for off-road applications where low weight and long-distance reliability are a priority, the D232 is a new concept in super light dropper posts.
Designed for off-road applications where low weight and long-distance reliability are a priority, the D232 is a new concept in super light dropper posts.
Designed for off-road applications where low weight and long-distance reliability are a priority, the D232 is a new concept in super light dropper posts.
Designed for off-road applications where low weight and long-distance reliability are a priority, the D232 is a new concept in super light dropper posts.
The Ratchet LN upgrade kit enables the conversion of DT Swiss 3-pawl hubs to the renowned DT Ratchet freehub system. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap. Ratchet EXP freehub, fits only DT aftermarket hubs and higher end wheels using the Ratchet EXP system.
Combination rim and tubeless sealing tape available on a wide variety of widths to fit different internal rim widths, from skinny XC race hoops to full-on DH race wheels.
Tool kit set for servicing the bearings on radial 240 and 190 front hubs.
Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles.
Service kit for DT Swiss 3-pawl freehubs system. Includes 3 replacement pawls, a retaining spring and a tub of specially formulated DT grease.
The DT Swiss 18-tooth ratchet kit allows replacement of any DT Swiss standard star ratchet Freehub engagement system. 18 tooth engagement. Compatible with all DT star ratchet based hubs. <iframe width="560" height="315" src="https://www.youtube.
