Products tagged with Bicycle Bike tools
TL-BME02 Battery mount setting tool for BM-E8010 (BT-E8010) is product number 14 in the attached image. Genuine Shimano replacement part.
Splined contact surface for the removal of Shimano freewheels from rear hub.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
A simple adaptor to allow the use of a standard crank extractor tool with Shimano Octalink splined cranks.
MAHLE X35+ specific tool to open the drive unit.Mandatory to change the freewheel on the X35 system.Includes bolts.
This tool allows the removal of MAHLE bottom bracket bearings without disassembling them from the bike, significantly reducing the risk of damage and improving maintenance efficiency.
Tapping instructions . Remove your old star-nut and tap the top of your steerer tube. This might sound daunting, but we've made it super easy to do on your bike, without even removing your fork.
The EDC Plug & Plier Kit is the perfect addition to the EDC V2 Tool .
Product Specs . 2, 2.5, 3, 4, 5, 6, 8mm Hex. T25 Torx. Flat Head Screwdriver . EDC Top Cap Tool. Innovative 8mm hex design. The EDC Tool contains no loose easy to lose driver bits. Weight: 58g. Color: Black.
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubs.
Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs.
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
TL-PD400 cone adjusting tool set is product number 6 in the attached image. Genuine Shimano replacement part.
TL-FH17A seal ring presser is product number 28 in the attached image. Genuine Shimano replacement part.
Adaptor for using Lefty Hubs in the DT Proline professional truing stand.
TL-WHR92 nipple wrench 3.4 mm is product number 13 in the attached image. Genuine Shimano replacement part.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
Headtube drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with multiple steps to fit common head tube inner diameters listed below Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Easy-to-use tool removes and installs replacement bushings Includes retaining tool, top cap and all three eyelet slammers Fits all eyelet sizes - 10mm, 12mm and 1/2.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
