Products tagged with Bicycle Di2 Spares
SM-JC41 E-tube cable junction for internal wire routing. Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box. To be positioned neatly inside frame tubing when connected. Cables sold separately
E-tube Di2 D-FLY inline data transmission wireless unit. Allows information to be sent wirelessly via ANT+ private network to compatible cycle computers. Information can be displayed about gear position and Di2 battery level.
EW-JC304 E-tube cable junction for internal EW-SD300 wire routing. The 4 port Junction is required for connection of several componnts into the system with EW-SD300 wires. To be positioned neatly inside frame tubing when connected. Cables sold separately.
SM-JC200 E-tube 2 port cable junction for internal wire routing. Can be positioned neatly inside frame tubing when connected. Cables sold separately. Reliable and secure water resistant connectors.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.
SM-PCE02 PC setting cable, SD300 type, 2050 mm is product number 3 in the attached image</li>. Genuine Shimano replacement part</li>.
E-tube Di2 internal cable routing grommets to protect the wires as they enter the frame from snagging. Protective solution that is quick and easy to install. Pack of 4 to fit 7 x 8 mm oval frame hole diameter.
E-tube SEIS Y-split electric wire (3 connectors). cable lengths 550 mm / 550 mm / 50 mm. Reliable and secure water resistant connectors.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.
Alfine Di2 8-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 8-speed Alfine Di2 specific hub with EW-SD300 wire connection.
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine Di2 specific hub with EW-SD300 wire connection.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the rear derailleur to instantaneously select the correct gear.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the rear derailleur to instantaneously select the correct gear.
SW-RS801 band, 31.8 mm is product number 3 in the attached image. Genuine Shimano replacement part.
SM-PCE2 micro USB cable is product number 1 in the attached image. Genuine Shimano replacement part.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.
