Collection
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
E-MTB's are a whole ton of fun but there's no denying that they are extremely hard on components, especially wheels. It's not just the extra mass; the huge, sustained torque an E-bike and rider can produce means standard wheels simply don't last.
Ideal for the rider who wants a super tough and full, 30 mm wide Enduro rim but would rather bust berms than their budgets.
BR-M987 bleed nipple and seal ring is product number 10 in the attached image. Genuine Shimano replacement part.
CJ-NX40 Cassette joint unit is product number 34 in the attached image. Genuine Shimano replacement part.
CJ-8S40 outer casing holder unit is product number 25 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
BR-R8170 caliper fixing bolt, for C2 10 mm is product number 21 in the attached image. Genuine Shimano replacement part.
BR-R9270 bleeding spacer is product number 31 in the attached image. Genuine Shimano replacement part.
CS-R9100 Lock Ring is product number 1 in the attached image. Genuine Shimano replacement part.
CS-M7000 sprocket unit (31-35-40T) for 11-40T is product number 11 in the attached image. Genuine Shimano replacement part.
CS-M7000 lock ring and spacer is product number 1 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TU-F right hand spoke, 282 mm is product number 9 in the attached image. Genuine Shimano replacement part.
ST-R8000 bracket cover pair is product number 12 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-R9270-C50-TU-F seal ring is product number 3 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TL-F valve unit is product number 23 in the attached image. Genuine Shimano replacement part.
WH-RX31-F12 Complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
