Collection
SG-4R40 Nexus left cone is product number 22 in the attached image. Genuine Shimano replacement part.
SG-7R45 Nexus ball retainer F 3/16 x 12 is product number 21 in the attached image. Genuine Shimano replacement part.
ST-6770 dummy plug is product number 7 in the attached image. Genuine Shimano replacement part.
Aero For All! The AR 1600's are designed to offer the highest aero performance yet seen from an alloy system, whether you're looking for a race wheelset for evening circuits or a dependable but speedy set of training hoops.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
RD-M9100 P-seal ring is product number 17 in the attached image. Genuine Shimano replacement part.
BR-4700 front pivot assembly bolt 35.7 mm, pivot nut 10.5 mm is product number 2 in the attached image. Genuine Shimano replacement part.
BR-4700 front pivot assembly bolt 50.4 mm, pivot nut 10.5 mm is product number 2 in the attached image. Genuine Shimano replacement part.
BR-M987 pad axle and snap retainer is product number 16 in the attached image. Genuine Shimano replacement part.
BR-M987 bleed nipple and seal ring is product number 10 in the attached image. Genuine Shimano replacement part.
CJ-NX40 Cassette joint unit is product number 34 in the attached image. Genuine Shimano replacement part.
BM-E8020 key cap is product number 9 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-R9270-C36-TU-F left hand spoke, 285 mm is product number 21 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TU-F right hand spoke, 282 mm is product number 9 in the attached image. Genuine Shimano replacement part.
ST-R8000 bracket cover pair is product number 12 in the attached image. Genuine Shimano replacement part.
Reliable, highly rigid E-thru axle for 148 x 12 mm Shimano hubs Hollow axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal Designed for use with 148 x 12 mm frame dropouts.
Reliable, highly rigid E-thru axle for 100 x 12 mm Shimano front hubs Alloy axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal.
SPD-SL cleats spacers enabling the perfect cleat setup Stackable spacers allow you between 1mm and 5mm height adjustment Kit comes complete with 1mm spacer x 1pc 2mm spacers x 2pcs M5 x 10mm bolts x 3pcs M5 x 13.5mm bolts x 3pcs.
SH10 red cleat fixed type 0 degree Walkable design with ground contacts points to prevent wearing of cleat.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
