Wheels Manufacturing

Aluminium front derailleur shims to ease setupSetup standard front derailleur sizes on smaller seat tubes.

Single speed conversion kit with 16 tooth cog. Machined 6061 aluminium spacersZinc plated 16 tooth cog. Spacers are black anodized to increase durability of finish.

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.

Thread together bottom bracket for 386EVO and bottom bracket frames and 29mm spindle diameter cranks (SRAM DUB). Machined Aluminium cups thread together for stability, increased bearing life, and simple installation and maintenanceNo more creaking.

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.

Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.

Replacement spacer pack for Wheels Mfg 29mm spindle (SRAM DUB) bottom brackets. Bearings sold separatelyPack Includes2 x Silicone Dust Seal, 29mm ID, 42mm OD2 x 0.5mm, 29mm ID Crank Spindle Spacer2 x 0.5mm, 29mm ID Crank Spindle Spacer.

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 2.5mm spacers with a 29mm I.D.

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 5mm thick spacers with a 29mm I.D.

BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips.

BB30 service kit with x2 clips and x2 6806 Angular Contact Enduro bearings.

Run Shimano HollowTech-II cranks in your BB30 frameShims are based on industry standard BB30 bottom bracket shells. Easy to install and machined for exact fitShims press fit directly into BB30 bearings (6806).

Run SRAM / Truvativ cranks with 24/22mm axles in your BB30 frame. Easy to install and machined for exact fit. Shims press fit directly into BB30 bearings (6806)You will need the 6806 bearings already installed into the BB30 shell to start this conversion.

Run SRAM cranks in your 386EVO frameShims are based on industry standard 386EVO bottom bracket shells386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.

Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.

Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.

Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.

Our solution for running a 29mm spindle crankset (SRAM DUB) in a BSA threaded frameMachined aluminium cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shellFully serviceable.

Run Shimano HollowTech-II cranks in your BB. Right frameShims are based on industry standard BB. Right bottom bracket shellsEasy to install and machined for exact fit.

Run SRAM cranks in your BBRight frame. Shims are based on industry standard BBRight bottom bracket shells. Easy to install and machined for exact fit.

Sealed bearing extractor for 22mm ID bearingsExtractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.

Sealed bearing extractor for 24mm ID bearings.