Wheels Manufacturing
High quality spare spacers for Freehub bodies and outboard bottom bracket cups.
Aluminium handlebar shims for setting up smaller bars with larger stem openingsWill convert 25.4mm diameter bars to 31.8mm clampPrecision machined from 6061 aluminium.
Single speed conversion kit with 16 tooth cog. Machined 6061 aluminium spacersZinc plated 16 tooth cog. Spacers are black anodized to increase durability of finish.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks29mm I.D. for use with SRAM DUB cranks0.5mm thick10 spacers per bagMachined engineering-grade Delrin.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks29mm I.D. for use with SRAM DUB cranks1.0mm thick10 spacers per bagMachined engineering-grade Delrin.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 2.5mm spacers with a 29mm I.D.
Run Shimano HollowTech-II cranks in your BB30 frameShims are based on industry standard BB30 bottom bracket shells. Easy to install and machined for exact fitShims press fit directly into BB30 bearings (6806).
Run SRAM / Truvativ cranks with 24/22mm axles in your BB30 frame. Easy to install and machined for exact fit. Shims press fit directly into BB30 bearings (6806)You will need the 6806 bearings already installed into the BB30 shell to start this conversion.
Run SRAM cranks in your 386EVO frameShims are based on industry standard 386EVO bottom bracket shells386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.
Our solution for running a 29mm spindle crankset (SRAM DUB) in a BSA threaded frameMachined aluminium cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shellFully serviceable.
Run any SRAM cranks in any bottom bracket designed for 30mm axles.
Run any Shimano cranks in any bottom bracket designed for 30mm axles.
Thread together bottom bracket for frames using the BB. Right bottom bracket standard and SRAM DUB cranks with 29mm spindle diameter.
Sealed bearing extractor for 22mm ID bearingsExtractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
Sealed bearing extractor for 24mm ID bearings.
