Bike tools
Professional tool kit for servicing all Ratchet EXP, Hügi ratchet and 3-Pawl DT Swiss Hubs.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs.
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Bearing installation cylinder for front hubs wit 24 mm bearings. Please consult your wheel's service manual before ordering this tool to see whether it is required.
35 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
Revised tool for installing the drive side hub shell seal on DT Ratchet hubs. Ensures the seal is aligned correctly and not damaged during installation, revised shape to fit over the oversized axles used on some Hybrid hubs.
Adaptor for using Lefty Hubs in the DT Proline professional truing stand.
TL-WHR92 nipple wrench 3.4 mm is product number 13 in the attached image. Genuine Shimano replacement part.
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate dial gauge readout.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
Sealed bearing extractor for 24mm ID bearings.
Sealed bearing extractor for 25mm ID bearingsExtractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
Headset cup drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with steps to fit common headset cups with 1-1/8 and 1-1/2 bearings May work with other size cups Not recommended for use with Wheels Mfg.
Headtube drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with multiple steps to fit common head tube inner diameters listed below Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 44mm ID and 52mm OD. 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Easy-to-use tool removes and installs replacement bushings Includes retaining tool, top cap and all three eyelet slammers Fits all eyelet sizes - 10mm, 12mm and 1/2.
Similar to its big brother but at a fraction of the size The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button.
