Bike tools
Tough genuine Shimano tool.
TL-BME02 Battery mount setting tool for BM-E8010 (BT-E8010) is product number 14 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part. Cuts hose cleanly at 90 degrees. Sets both silver and gold inserts into hose (2.1 and 2.3 mm bore diameter). Can be hung on hook for wall storage.
Genuine Shimano replacement part.
Splined contact surface for the removal of Shimano freewheels from rear hub.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
A simple adaptor to allow the use of a standard crank extractor tool with Shimano Octalink splined cranks.
MAHLE X35+ specific tool to open the drive unit.Mandatory to change the freewheel on the X35 system.Includes bolts.
This tool allows the removal of MAHLE bottom bracket bearings without disassembling them from the bike, significantly reducing the risk of damage and improving maintenance efficiency.
The EDC Tube Strap Mount is a flat mounting bracket with an included EDC Gear Tension Strap. It lets you carry a spare tube without scratching or scuffing your frame. The strap's adjustable 355mm length lets you carry other stuff too, and it's replaceable
The EDC Tool Frame Kit includes the tool carrier plastic parts, tire leaver and storage capsule. The EDC Tool Frame Kit V2 is not compatible with the V1 (green) chainbreaker tool. KIT CONTAINS . Tire Lever. Sealed Storage Capsule(s).
The EDC Tool Chainbreaker Kit includes the chainbreaker and bolt to attach to the EDC storage carrier. The EDC Tool Chainbreaker Kit V2 is not compatible with the EDC Tool Frame Kit V1. KIT CONTAINS . Chainbreaker. Spare Bolt .
Ergonomic 6 function multi-tool to cover a range of disc brake specific tasks. Lock ring wrench for external splines. Rotor truing fork to straighten warped or damaged rotors.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Professional tool kit for servicing all Ratchet EXP, Hügi ratchet and 3-Pawl DT Swiss Hubs.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Bearing installation cylinder for front hubs wit 24 mm bearings. Please consult your wheel's service manual before ordering this tool to see whether it is required.
TL-PD400 cone adjusting tool set is product number 6 in the attached image. Genuine Shimano replacement part.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
