Bike tools
For those looking to speed up the lacing and initial tensioning of DT Squorx equipped wheels the DT Torx driver will soon become one of your favourite tools. Fits most standard mains or battery operated drivers.
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show up to 10 mm of run out.
A classic nipple key design from the masters of spokes. Fits securely onto the flats of the nipple and allows nipples to be tensioned. Designed and developed to prevent rounding of the nipple flats. Red.
A tool to simplify the lacing of wheels, by holding the nipple. Simply clip the nipple onto the end of the tool and feed it through the rim. Perfect for deep section rims where access is limited.
Spins nipples onto spokes quickly and easily during wheel building. Alloy handle is durable and easy to grip. Indispensable tool if you are building wheels on a regular basis.
Tool kit set for servicing the bearings on straight pull 240 hubs, includes all the drifts and guides you need to install and remove the bearings easily and safely.
Tool kit set for servicing the bearings on radial 240 and 190 front hubs.
Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors), hammer and punch.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 39mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 42mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 44mm ID and 52mm OD. 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Precision machined anodized aluminium tool designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.
Precision machined anodized aluminium tool designed to allow for easy adjustment of the Fox DHX2 and FLOAT X2 shocks requiring a 3mm and 6mm hex wrench This small pocket sized tool allows for easy trail side adjustments of rebound and compression.
E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring Centre clearance for E-Bike wiring is 0.812, with a 12-spline 23mm OD tool fitting.
A new and more efficient take on the classic Wheels Manufacturing threaded press handles, the Adjustable Press Stop will make life easier for mechanics as it allows for quick and accurate positioning at the press of a button.
Similar to its big brother but at a fraction of the size The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
