Bike tools
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
65 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
TL-PD400 cone adjusting tool set is product number 6 in the attached image. Genuine Shimano replacement part.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
TL-FH17A seal ring presser is product number 28 in the attached image. Genuine Shimano replacement part.
TL-FC430 chainring installation tool for chainring for DU-EP801 / DU-EP600 is product number 7 in the attached image. Genuine Shimano replacement part.
TL-WHR92 nipple wrench 3.4 mm is product number 13 in the attached image. Genuine Shimano replacement part.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
A super light and portable aluminium spoke tool, ideal for tourers and bike packers. Includes standard spoke interface, alongside a torx nipple interface and a slot for holding aero spokes. makes a great keyring, never ride without it!.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles.
Two sided splined socket tool for installing and removing both 48.5mm and 44mm 16-notch bb cupsWorks with 1/2" drive torque wrench3/8" drive adapter includedPrecision machined 6061 aluminium.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
Headtube drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with multiple steps to fit common head tube inner diameters listed below Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Easy-to-use tool removes and installs replacement bushings Includes retaining tool, top cap and all three eyelet slammers Fits all eyelet sizes - 10mm, 12mm and 1/2.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - PRO . Axle Ruler Pro Feast your eyes on the Axle Ruler Pro - the precision tool that's about to revolutionize your bike mechanic game.
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration The gauge can measure everythig.
