Products tagged with Wheels Manufacturing Bike tools
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors), hammer and punch.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
This drift and over axle set is used to install less common-sized thru-axle and frame sealed bearings Compatible with the 3/8 Wheels Mfg. WMTLBBPPK, WMTLBBPEK, WMTL1 handles and rod.
E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring Centre clearance for E-Bike wiring is 0.812, with a 12-spline 23mm OD tool fitting.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.
A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames This single-sided socket is used for installing and removing 48.
Introducing the new E-Bike Lockring Tool from Wheels Mfg Designed to save the mechanic time and money, the new e-bike lockring sockets are machined to match manufacturer specifications.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
A new and more efficient take on the classic Wheels Manufacturing threaded press handles, the Adjustable Press Stop will make life easier for mechanics as it allows for quick and accurate positioning at the press of a button.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - PRO . Axle Ruler Pro Feast your eyes on the Axle Ruler Pro - the precision tool that's about to revolutionize your bike mechanic game.
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration The gauge can measure everythig.
Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8 Press Rod and handles from Wheels Mfg This kit includes x1 3/8 ACME threaded rod, x2 30mm frame linkage standoffs and x2 threaded handles.
A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames.
These extractors remove sealed bearings with inside diameters from 22mm, 24mm, 29mm, and 30mm Removes these sealed bearing sizes: 6806, 24x37, 29DUB, GXP22 Bearing extractors grip the inside race of a sealed bearing.
Headset cup drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with steps to fit common headset cups with 1-1/8 and 1-1/2 bearings May work with other size cups Not recommended for use with Wheels Mfg.
Headtube drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with multiple steps to fit common head tube inner diameters listed below Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles.
Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 39mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.
