Products tagged with Shimano Di2 Spares
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine Di2 specific hub with EW-SD300 wire connection.
Alfine Di2 5-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 5-speed Alfine SG-S7050 Di2 specific hub.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the rear derailleur to instantaneously select the correct gear.
SM-JC41 E-tube cable junction for internal wire routing. Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box. To be positioned neatly inside frame tubing when connected. Cables sold separately
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.
Genuine Shimano replacement part. Plug tool required for inserting and removing E-tube EW-SD300 Di2 wires from mechs, shifters and junctions without damage.
E-tube Di2 internal cable routing grommets to protect the wires as they enter the frame from snagging. Protective solution that is quick and easy to install. Pack of 4 to fit 7 x 8 mm oval frame hole diameter.
Alfine Di2 5-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 5-speed Alfine Di2 specific hub with EW-SD300 wire connection.
Alfine Di2 8-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 8-speed Alfine SG-S7051 Di2 specific hub.
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine SG-S7051 Di2 specific hub.
SM-JC200 E-tube 2 port cable junction for internal wire routing. Can be positioned neatly inside frame tubing when connected. Cables sold separately. Reliable and secure water resistant connectors.
SM-PCE02 PC setting cable, SD300 type, 2050 mm is product number 3 in the attached image</li>. Genuine Shimano replacement part</li>.
EW-JC302 E-tube cable junction for internal EW-SD300 wire routing. The 2 port Junction is required for inline connection of two EW-SD300 wires. To be positioned neatly inside frame tubing when connected. Cables sold separately.
EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to the 5.1 mm EW-SD50 wires with the use of EW-AD305 adapter. Reliable and secure water resistant connection.
E-tube SEIS Y-split electric wire (3 connectors). cable lengths 550 mm / 550 mm / 50 mm. Reliable and secure water resistant connectors.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.
