Products tagged with Shimano Di2 Spares

Di2 charger cable for the internal battery that will keep your Di2 system shifting. Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger. 1.5 hour charge time.

E-tube Di2 PC interface is required for quick and easy problem solving via your PC. the PC interface simply plugs into any part of the electrical system and can test each component diagnosing the cause of any problems on your PC.

The power house of Shimano Di2 is a long-life 7.4V Li-Ion battery that is both compact and reliable, taking shifting effort away from you.

Genuine Shimano replacement part. Plug tool required for inserting and removing E-tube Di2 wires from mechs, shifters and junctions without damage.

E-tube Di2 cord band for tidy attachment of wires to handlebars. For SD300 wires. Quick and easy to install. For 35 mm diameter bar.

With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the rear derailleur to instantaneously select the correct gear.

Di2 charger for the internal battery that will keep your Di2 system shifting. Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger. 1.5 hour charge time.

The power house of Shimano Di2 is a long-life 7.4V Li-Ion battery that is both compact and reliable, taking shifting effort away from you.

BM-DN100 short type battery mount for external or internal frame cable routing. To be mounted on specific Di2 compatible frame battery mounts. Internal chip enables system wireless functionality of Bluetooth components. Battery sold separately.

Alfine Di2 8-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 8-speed Alfine SG-S7051 Di2 specific hub.

With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.

With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.

With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.

E-tube Di2 D-FLY inline data transmission wireless unit. Allows information to be sent wirelessly via ANT+ private network to compatible cycle computers. Information can be displayed about gear position and Di2 battery level.

With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear.

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.

Genuine Shimano replacement part. Plug tool required for inserting and removing E-tube EW-SD300 Di2 wires from mechs, shifters and junctions without damage.

SM-PCE02 PC setting cable, SD300 type, 2050 mm is product number 3 in the attached image</li>. Genuine Shimano replacement part</li>.

E-tube Di2 internal cable routing grommets to protect the wires as they enter the frame from snagging. Protective solution that is quick and easy to install. Pack of 4 to fit 7 x 8 mm oval frame hole diameter.

E-tube Di2 internal cable routing grommets to protect the wires as they enter the frame from snagging. Protective solution that is quick and easy to install. Pack of 4 to fit 6 mm round frame hole diameter.

E-tube Di2 cable cover sheath for EW-SD50 wires. Neat and tidy solution to attach, hide and protect external routed cables on bike frames. Easy to attach high grip sticky backed sheath that can be simply cut to length and used where required.

EW-JC302 E-tube cable junction for internal EW-SD300 wire routing. The 2 port Junction is required for inline connection of two EW-SD300 wires. To be positioned neatly inside frame tubing when connected. Cables sold separately.

EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to the 5.1 mm EW-SD50 wires with the use of EW-AD305 adapter. Reliable and secure water resistant connection.

Use if standard mount is not compatible with your bike. If you are having problems making the Di2 battery fit try the battery mount adapter.