Products tagged with Bicycle Electric Bike Parts
Compact designed handle bar mount STEPS info display cycling computer. Standard bike computer functions. The display will include the wireless chip for both Bluetooth and ANT private signals so it can easily be used with the e-tube apps.
BM-E8016 Steps battery mount for BT-E8016. Frame external downtube mount. Cable length 600 mm.
Shimano HG standard freewheel for the X35+ system including the right side of the motor cover.
Standard X35+ system control unit with one button desgin and LED light for: On / off, battery and system information, assist level control and lights control.
High quality, long lasting down tube mounting lithium-ion battery pack for Shimano STEPS systems. Battery shape to allow for rear shocks and plenty of top tube clearance. In normal mode the riding distance could exceed 100 km.
Shimano's STEPS E8000SM-DUE10 Speed sensor unit. E-tube cable lengths available 340, 540, 760 and 1400 mm. For chainstay mounting. Plugs directly into DU-E8000 drive unit.
To control the power mode on the STEPS drive unit you can easily toggle between, Off, Eco, Trail and Boost support modes plus Walk Assist mode.
High quality, long lasting integrated frame mounting lithium-ion battery pack for Shimano STEPS systems. In normal mode the riding distance could exceed 100 km. Waterproof design as well as impact and vibration resistant.
BM-EN800-B Steps battery mount with key unit mount. Battery cable length 250 mm. without cable to EW-CP100.
Replacement crank arm for E-bikes various lengths available 160mm, 165mm, 170mm, 175mm. This product is not backwards compatible with DU-E8000 / DU-E7000 & DU-E6100 Drive Units. This is a genuine Shimano replacement part.
High quality, long lasting down tube mounting lithium-ion battery pack for Shimano STEPS systems. Battery shape to allow for rear shocks and plenty of top tube clearance. In normal mode the riding distance could exceed 100 km.
Compact designed handle bar mount STEPS info display cycling computer. Standard bike computer functions. The power modes are shown with a different colour on this display so it is easy to take a glance while riding.
Handle bar mount STEPS info display cycling computer. Standard bike computer functions. Black and white display. Also provides, assist mode, current speed, trip distance, odometer and battery level indication. 1 E-tube EW-SD300 ports.
Satellite power On/Off switch for Shimano STEPS E-bikes. EW-SD50 wire compatible semi-integrated frame satellite switch. With E-tube cable, 1100 mm.
High quality, long lasting integrated frame mounting lithium-ion battery pack for Shimano STEPS systems. In normal mode the riding distance could exceed 100 km. The same size and fit dimensions as BTE8036 but with 504Wh.
High quality, long lasting integrated frame mounting lithium-ion battery pack for Shimano STEPS systems. In normal mode the riding distance could exceed 100 km. Waterproof design as well as impact and vibration resistant.
All in one controller Ultimate solution for flat handlebars. Compatible with the X20 and X30 Systems, the Duo remote allows you to control your eBike, without moving your hands from the handlebar.
Drive Unit 36V 250W EU-version.Built-in axle.Non-removable freewheel.Wired motor connector.
High quality, long lasting rear rack mounted lithium-ion battery pack for Shimano STEPS systems. 1000 charge cycles without significant power loss. Approximately four hours charge time. High 418Wh capacity (36V, 11.6Ah). Average weight 2600g.
To control the power mode on the STEPS drive unit use this left hand shifter. Should you get to a part of the trail where riding is not possible, you can active walk mode but pressing and holding the shifter down for assist up to 6kph.
Simple control of STEPS drive unit thanks to ergonomic design and intuitive layout. Three easy to click buttons, two for shifting up or down and one for Walk Assist. Easy to reach without having to move your hand from the grip.
Compact designed handle bar mount STEPS info display cycling computer. Standard bike computer functions. The display will include the wireless chip for both Bluetooth and ANT private signals so it can easily be used with the e-tube apps.
STEPS info display mounting bracket. To fit 31.8 mm bar diameter.
Shimano's STEPS Speed sensor unit for disc rotor lockring position. EW-SD300 3.45 mm diameter E-tube cable, length 1400 mm. For chainstay mounting. Plugs directly into DU-EP800 drive unit.
