Collection
SM-S705 fitting components for Alfine Di2 hubs. Kit includes non-turn washers for track drop outs (5R / 5L) and cap nuts.
Alfine fitting kit including vertical drop out non-turn washers (8R / 8L), cap nuts and CJ-S700 cassette joint unit. Please order Alfine shifter and sprocket separately.
Alfine Rapidfire lever with easy to read optical gear display. Precise Shimano Rapidfire shifting developed for Alfine S7000 top normal structure. Comes complete with inner and outer cable SP41 cable.
Alfine Di2 8-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 8-speed Alfine Di2 specific hub with EW-SD300 wire connection.
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine SG-S7051 Di2 specific hub.
Alfine single sprocket with built in chain guide. Nickel plated for excellent durability.
Alfine series post mount brake calliper gives you plenty of power when you require it. For use with mineral oil which is non-corrosive and less hazardous than conventional hydraulic fluid.
The Shimano FC-M361 Acera 7/8 speed triple chainrings are the perfect replacement for worn or damaged chainrings. Shimano's Alivio class leading chainrings offer the optimum balance of light weight and rigidity for precise shifts even under high loads.
Torque washers to install the X35+ drive unit in the dropouts.The torque washers support the motor against the frame and prevent any unwanted movement.
Features:System Connection & Mount user manual (7 languages).
Plastic cable protection shield for the X35 motor cable.Prevents the cable to get damaged by the disc rotor during use or installation.
Freewheel Set compatible to Shimano MicroSpline Steel. Includes right end cap and spacer.
Freewheel Set compatible to Shimano HG Steel. Includes right end cap and spacer.
Freewheel Set compatible to Shimano HG Alu. Includes right end cap and spacer.
This tool allows the removal of MAHLE bottom bracket bearings without disassembling them from the bike, significantly reducing the risk of damage and improving maintenance efficiency.
Allows SRAM dub crankset compatibility for MAHLE BB46-30.
Allows SRAM dub crankset compatibility for MAHLE BB46-30.
Magnet ring fixing the freewheel to communicate with the PAS Sensor. Compatible with cassettes of 12 speeds.
Design to deliver maximum power in minimal time. Compatible with X20 and X30 Systems.
Connector cable for External BatteryRange Extender e185 to the bike with 100mm cable length.
Connection cable for X35 standard charger for EU standard socket.
FC-R8100-P left hand crank arm unit, 172.5 mm is product number 1 in the attached image. Genuine Shimano replacement part.
