Collection
Spare drink tube for the Aero HC Drink SystemSupplied at 280mm - cut to length as required.
Replacement soft drink straw for Profile Design hydration systemsSuits Aerodrink / Aqualite when used in conjunction with hard straw and Aero HC drink system when used on it's own.
ASC PRO +/- WEDGE Specifications Weight: 10g / Pair. Compatibility: A3 / ASC PRO only. The ASC Pro Tilt Wedges are available in increments of 1ø, 2ø, 3ø, 4ø, and 5ø, allowing precise adjustment of the ASC Pro default 15ø angle to match the rider's fit.
The ASC Pro reintroduces Profile Design to the one-piece extension category that we first pioneered nearly 20 years ago with the Sonic Stryke.
Plus armrest kits are lengthened to 124mm and increase the contact surface for your arms, thus lowering the pressure on your skinAdditionally, we've developed a new surface pattern that helps to increase grip and wick away sweat.
HSA MINI BTA MOUNT The HSA Mini offers a sleek and lightweight solution for mounting a bottle cage on your aerobars. It was designed with the ASC series extensions in mind and works equally well on any 100mm spaced round extensions.
The Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. A great option for riders who wish to maximise the number of positions they can utilise.
These pad wedges enable riders to angle their armrests by 10 degrees or 15 degrees and utilise Profile Design armrests for an additional comfort gain.
The WING/A base bar is an entry level base bar that offers a sleek aero profile, with upswept extensions to offer comfort and hand support Features: CABLE ROUTING : Internal cable routing. MATERIAL : 6061-T6 Aluminium. WEIGHT : 290g (for the 40cm).
Profile Design Genuine Part.
Plus armrest kits are lengthened to 124mm and increase the contact surface for your arms, thus lowering the pressure on your skinAdditionally, we've developed a new surface pattern that helps to increase grip and wick away sweat.
This item replaces one of your standard headset spacers and allows a Di2 junction box to be mounted without rubber bands around stem. Alloy headset spacer with plastic overmould. Available in 6 or 17 degrees. Unobtrusive, lightweight design.
Aluminium front derailleur shims to ease setupSetup standard front derailleur sizes on smaller seat tubes.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing Large Bearing Press.
Thread together bottom bracket for 386EVO and bottom bracket frames and 29mm spindle diameter cranks (SRAM DUB). Machined Aluminium cups thread together for stability, increased bearing life, and simple installation and maintenanceNo more creaking.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Genuine Wheels Manufacturing SpareDesigned for use with the Wheels Manufacturing small Bearing Press.
Replacement spacer pack for Wheels Mfg 29mm spindle (SRAM DUB) bottom brackets. Bearings sold separatelyPack Includes2 x Silicone Dust Seal, 29mm ID, 42mm OD2 x 0.5mm, 29mm ID Crank Spindle Spacer2 x 0.5mm, 29mm ID Crank Spindle Spacer.
