Collection
CS-M8000 lock ring and spacer is product number 1 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-RS700-C30-TL-R complete hub axle is product number 2 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TL-F valve unit is product number 23 in the attached image. Genuine Shimano replacement part.
WH-RX31-F12 Complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
Reliable, highly rigid E-thru axle for 142 x 12 mm Shimano rear hubs Alloy axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal.
SH10 red cleat fixed type 0 degree Walkable design with ground contacts points to prevent wearing of cleat.
FC-MT500 left hand crank arm unit, 165 mm is product number 2 in the attached image. Genuine Shimano replacement part.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
Fat Bike version of the RWS system from DT Swiss that revolutionises the way we attach our wheels by doing away with the cam system. Designed for 150 x 15 mm front ends.
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate dial gauge readout.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
BM-E8020 rubber M8 fixing is product number 6 in the attached image. Genuine Shimano replacement part.
BT-E8020 frame CG port cap is product number 2 in the attached image. Genuine Shimano replacement part.
BT-E8020 CG port cap assembly is product number 1 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TL-F right hand spoke, 280.5 mm is product number 10 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TU-R left hand spoke, 255 mm is product number 22 in the attached image. Genuine Shimano replacement part.
