Collection
BL-M7100 right hand lever member unit is product number 3 in the attached image. Genuine Shimano replacement part.
SM-CRE80 44T double chain guard unit is product number 15 in the attached image. Genuine Shimano replacement part.
SM-CRE80 4 arm adapter is product number 7 in the attached image. Genuine Shimano replacement part.
FC-R9100-P left crank fixing ring is product number 3 in the attached image. Genuine Shimano replacement part.
HB-M770 S ball retainer is product number 5 in the attached image. Genuine Shimano replacement part.
FH-M810 ball retainer 3/16 is product number 4 in the attached image. Genuine Shimano replacement part.
ST-6770 dummy plug is product number 7 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement front axle spacer.
Replacement lever for standard DT axles and skewers.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
BR-4700 front pivot assembly bolt 35.7 mm, pivot nut 10.5 mm is product number 2 in the attached image. Genuine Shimano replacement part.
CJ-8S40 cassette joint unit is product number 20 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-RS700-C30-TL-R complete hub axle is product number 2 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TL-F valve unit is product number 23 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Reliable, highly rigid E-thru axle for 100 x 12 mm Shimano front hubs Alloy axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal.
SH12 blue cleat front centre pivot type 2 degree Walkable design with ground contacts points to prevent wearing of cleat.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
BM-E8020 rubber M8 fixing is product number 6 in the attached image. Genuine Shimano replacement part.
