Collection
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front hubs to work with Rockshox Torque Cap compatible forks. Fits 350 and 370 hubs, as well as 1700 and 1900 series MTB wheels.
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part.
SW-M8050 A lever right hand is product number 4 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-R9170-C60-TU-R12 complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
HB-RS770 ball retainer, 5/32 is product number 4 in the attached image. Genuine Shimano replacement part.
WH-R9100-C60-TU-F valve extension unit is product number 24 in the attached image. Genuine Shimano replacement part.
WH-RX010-F complete hub axle, 108 mm is product number 2 in the attached image. Genuine Shimano replacement part.
ST-4703 clamp band unit, 23.8 mm, 24.2 mm is product number 6 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
FH-M8110 right hand ball retainer, 3/16"" x 13 mm is product number 3 in the attached image. Genuine Shimano replacement part.
FH-M8110-B complete hub axle, 148mm is product number 1 in the attached image. Genuine Shimano replacement part.
BL-M640 right hand lid is product number 3 in the attached image. Genuine Shimano replacement part.
BR-IM75 seal ring for brake is product number 20 in the attached image. Genuine Shimano replacement part.
BR-IM70 grease hole cap is product number 16 in the attached image. Genuine Shimano replacement part.
ST-7900 tool A for E-ring is product number 13 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement bearing. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement bearing. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs.
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
