Collection
A simple way of using an older post mount calliper on a modern flatmount designLightweight self aligning designNo need to face your forks or frame, the adaptor will compensate for any paint or frame imperfections.
Genuine DT Swiss replacement partConverts into 5 mm Q/RPlease refer to the DT Swiss online Product Support Guide for a full chart of possible conversions for wheelsets and individual hubs
Genuine DT Swiss replacement bearingPlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs
Genuine DT Swiss replacement partConverts into 12 mm thru-axleEnd capsPlease refer to the DT Swiss online Product Support Guide for a full chart of possible conversions for wheelsets and individual hubs
Ring Nut tool required for removing and replacing inner bearings on pawl drive rear hubs. which are located behind the internal ring nutOnly works on Pawl hubs as used on DT complete wheels. for ratchet and aftermarket hubs please use tool HBDT835
Weldtite loose ball bearings (1/8") are small, precision steel balls used for bicycle maintenance, commonly found in freewheels, pedals, and cassettes
onquer challenging climbs with the FSA Road Tempo chainring.
Shimano 105 BR-5810 Direct Mount Road Brake Calipers
An economy unisex model featuring a cutting-edge Bosch drive unit and comfortable mounting, fully equipped for long cycle track trips, and everyday city commuting.
The Rock Machine Torrent e50-29B Touring Edition is designed for all kinds of adventures.
2x Favero 0 degree float compatible cleats (LOOK Keo Cleats standard). 4x mounting bolts for installation. Weight. 0.083kg.
2x compatible SPD-SL cleats, 6 degree floating. 3x mounting bolts and cleat nuts for fixing.
1x USB/Micro-USB Cable (2m long) for ASSIOMA DUO/UNO/DUO-Shi. Specifically designed to easily recharge your Assioma without uninstalling it from the bike. Weight. 0.04kg.
1x USB-C 2-way charging cable (2m long). 2x adapters from USB-C to micro-USB. Specifically designed to easily recharge your Assioma PRO without uninstalling it from the bike.
2x metal red rings. 1x additional bushing only useful for the right, regular pedal of the Assioma PRO single-sided version. Weight. 0.0063kg.
2x end caps. 1x screw cap (with red ring). 1x screw cap. 2x axial washers. 2x oil seals. 4x washers (art 773-00-36). 1x greasing tools kit (art 773-00-37). 1x rings set (art 773-00-38. Weight. 0.023kg.
1x left pedal body for Assioma PRO RS. 1x end cap. 1x screw cap. 1x oil seal. 1x axial washer. 1x greasing kit tool (art 773-00-37).
1x right, regular ASSIOMA PRO MX pedal without power meter. 2x washers. The product comes already assembled. This product is suitable only for Assioma PRO
MX-1. Weight. 0.
