Collection
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
Ideal for the rider who wants a super tough and full, 30 mm wide Enduro rim but would rather bust berms than their budgets.
BR-4700 front pivot assembly bolt 50.4 mm, pivot nut 10.5 mm is product number 2 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TU-F left hand spoke, 285 mm is product number 21 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TU-F right hand spoke, 282 mm is product number 9 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TL-F valve unit is product number 23 in the attached image. Genuine Shimano replacement part.
WH-RX31-F12 Complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
Reliable, highly rigid E-thru axle for 148 x 12 mm Shimano hubs Hollow axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal Designed for use with 148 x 12 mm frame dropouts.
Reliable, highly rigid E-thru axle for 142 x 12 mm Shimano rear hubs Alloy axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal.
SH12 blue cleat front centre pivot type 2 degree Walkable design with ground contacts points to prevent wearing of cleat.
SH10 red cleat fixed type 0 degree Walkable design with ground contacts points to prevent wearing of cleat.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
Fat Bike version of the RWS system from DT Swiss that revolutionises the way we attach our wheels by doing away with the cam system. Designed for 150 x 15 mm front ends.
The RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
ST-9000 right hand main lever support is product number 2 in the attached image. Genuine Shimano replacement part.
