Collection
Nervous to reach to the down tube to take a drink. The B-TAB bottle cage mount carries a standard bottle in an easily accessible position on the handlebars for riders who find it difficult to reach down to take a drink.
Do you ever find that bike handling is tricky with wet or sweaty hands. Get our super grippy Anti Slip bar wrap, designed specifically for aerobar systems.
The HSF Stem faceplate allows the Pro?le Design HSF/Aeria bottle to be fitted to our standard 1/Seventeen stem. The HSF Aeria bottle smoothes airflow onto the frame, offering the chance to lower aero drag while increasing hydration carrying capacity.
Spare parts kit for the FC drink system.
The Sonic bracket comes as standard fitment on our range of aluminium clip on bars The forged aluminium bracket offers solid, easy to use construction alongside an industry leading fit range. It is also compatible with our riser kits.
The subsonic bracket has the lowest drag coefficient of all our aerobar brackets The bracket is forged to create a sleek low stack design.
The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features Features: AERODYNAMIC : Improved 880ml shape is designed to improve airflow onto the frame and reduce drag. FLIP CAP : Easy no spill refill port.
Attaches to any of Profile Design rear mounted drink system or under a standard bottle cageAllows safe mounting of 2 standard threaded CO2 cartridges(not supplied) per bracketWeight: 23 g.
Durable and comfortable bar wrapCork-style synthetic tape is tough and durable.
Bring improved aerodynamics, lighter weight and better aesthetics to your existing Profile Design aerobar setup with the 52ASC carbon extensions.
The cable grommet is more than a tidy feature to finish your Profile Design barsThe rubber insert for base and road bars helps reduce cable rattle and the risk of damage to cable outers and most importantly e-wires.
Replacement soft drink straw for Profile Design hydration systemsSuits Aerodrink / Aqualite when used in conjunction with hard straw and Aero HC drink system when used on it's own.
ASC PRO +/- WEDGE Specifications Weight: 10g / Pair. Compatibility: A3 / ASC PRO only. The ASC Pro Tilt Wedges are available in increments of 1ø, 2ø, 3ø, 4ø, and 5ø, allowing precise adjustment of the ASC Pro default 15ø angle to match the rider's fit.
These pad wedges enable riders to angle their armrests by 10 degrees or 15 degrees and utilise Profile Design armrests for an additional comfort gain.
The WING/A base bar is an entry level base bar that offers a sleek aero profile, with upswept extensions to offer comfort and hand support Features: CABLE ROUTING : Internal cable routing. MATERIAL : 6061-T6 Aluminium. WEIGHT : 290g (for the 40cm).
Spare axle kit for 24 series wheels.
Replacement pad kits to suit Race / Ergo Plus armrest systems. Features a new surface design that increases grip in hot conditions and offers improved durability. New foam that resists being crushed for longer periods of time.
29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB-compatible bottom bracket cups.
Thread together bottom bracket for 386EVO and bottom bracket frames and 29mm spindle diameter cranks (SRAM DUB). Machined Aluminium cups thread together for stability, increased bearing life, and simple installation and maintenanceNo more creaking.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 5mm thick spacers with a 29mm I.D.
BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips.
Run SRAM cranks in your 386EVO frameShims are based on industry standard 386EVO bottom bracket shells386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.
