Collection
FH-M9111 right hand ball retainer, 3/16 x 13 mm is product number 3 in the attached image. Genuine Shimano replacement part.
RD-M985 P-seal ring is product number 15 in the attached image. Genuine Shimano replacement part.
RD-M981 bracket axle unit for normal type is product number 1 in the attached image. Genuine Shimano replacement part.
RD-M9100-GS stabilizer kit unit is product number 24 in the attached image. Genuine Shimano replacement part.
WH-M8100-TL-F15-B-29 complete hub axle is product number 2 in the attached image. Genuine Shimano replacement part.
BL-M8100 left hand lever member unit is product number 4 in the attached image. Genuine Shimano replacement part.
FC-MT511 left hand crank arm, 165 mm is product number 2 in the attached image. Genuine Shimano replacement part.
FC-MT511-1 left hand crank arm unit, 170 mm is product number 2 in the attached image. Genuine Shimano replacement part.
3/16 inch Ball Bearings, Pack of 22 is product number 5 in the attached image. Genuine Shimano replacement part.
SG-3C41 Nexus ball retainer L 3/16 x 14 is product number 20 in the attached image. Genuine Shimano replacement part.
Aero For All! The AR 1600's are designed to offer the highest aero performance yet seen from an alloy system, whether you're looking for a race wheelset for evening circuits or a dependable but speedy set of training hoops.
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
The RWS System from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
BR-4700 front pivot assembly bolt 35.7 mm, pivot nut 10.5 mm is product number 2 in the attached image. Genuine Shimano replacement part.
BR-M987 pad axle and snap retainer is product number 16 in the attached image. Genuine Shimano replacement part.
BR-M987 bleed nipple and seal ring is product number 10 in the attached image. Genuine Shimano replacement part.
BM-E8020 key cap is product number 9 in the attached image. Genuine Shimano replacement part.
BR-R9270 bleeding spacer is product number 31 in the attached image. Genuine Shimano replacement part.
CS-R9100 Lock Ring is product number 1 in the attached image. Genuine Shimano replacement part.
CS-M7000 lock ring and spacer is product number 1 in the attached image. Genuine Shimano replacement part.
