Collection
FC-S500 Alfine chainguard for 45 tooth ring is product number 16 in the attached image. Genuine Shimano replacement part.
FC-RX810 gear fixing bolt, M8 x 9, pack of 4 is product number 6 in the attached image. Genuine Shimano replacement part.
FC-R9200-P outer cap is product number 2 in the attached image. Genuine Shimano replacement part.
PD-M324 axle seal is product number 4 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
DT Ratchet DEG ratchet service kit, contains both 90 tooth ratchets, both springs, a freehub spacer and a tub of DT's specially formulated molykote TP 42 ratchet grease.
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibility. Ideal for MTB use and for rotors up to 203 mm. Lighter than the 6 bolts used to mount to a 6-bolt hub!.
Genuine DT Swiss replacement part.
DT Ratchet EXP Oversized ratchet service kit for high end EMTB Hybrid hubs, contains both 30 tooth ratchets, the spring and a tub of DT's specially formulated molykote TP 42 ratchet grease.
Genuine DT Swiss replacement part. Drive side spacer for 130 or 135 mm use with a SRAM XDR freehub. Check DT Swiss tech documents for your hub for compatibility.
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front EXP 180 and 240 hubs to work with Rockshox Torque Cap compatible forks. Fits model year 2024 and onwards XRC 1200 wheels.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Genuine DT Swiss replacement part. Drive side spacer for 130 mm DiCut road hub.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Shim ring for Ratchet EXP hubs only, will not fit older designs. Dimensions: Outer / Inner diameter 25.9 / 19.9 X 2.3 mm.
Genuine DT Swiss replacement part. Converts a Boost 20mm front hub into Boost 15 mm thru-axle. Please refer to the DT Swiss Tech Book for a full chart of possible conversions for wheelsets and individual hubs.
Single cylindrical ratchet spring for Ratchet EXP hubs only, will not fit older designs.
Genuine DT Swiss Ratchet LN freehub and end cap for DT 370 hubs equipped with Ratchet LN. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap. 3-Pawl freehub as found on many DT complete wheels.
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap. 3-Pawl freehub as found on many DT complete wheels.
