Collection
DT Ratchet DEG ratchet service kit, contains both 72 tooth ratchets, both springs, a freehub spacer and a tub of DT's specially formulated molykote TP 42 ratchet grease.
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front EXP 180 and 240 hubs to work with Rockshox Torque Cap compatible forks. Fits model year 2024 and onwards XRC 1200 wheels.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
WH-R8170-C60-TL-F spoke, 262 mm is product number 14 in the attached image. Genuine Shimano replacement part.
SW-RS801 rubber sheet, pack of 2 is product number 5 in the attached image. Genuine Shimano replacement part.
WH-R9170-R12 complete freewheel body is product number 6 in the attached image. Genuine Shimano replacement part.
WH-MT500-CL-R12-275 right hand spoke, 270 mm is product number 13 in the attached image. Genuine Shimano replacement part.
RD-M8120 P-axle unit & O-ring, SGS is product number 10 in the attached image. Genuine Shimano replacement part.
WH-6800-F complete hub axle is product number 2 in the attached image. Genuine Shimano replacement part.
WH-RS710-C32-TL-F valve unit is product number 15 in the attached image. Genuine Shimano replacement part.
SG-8C31 right hand dust cap A with seal is product number 3 in the attached image. Genuine Shimano replacement part.
SG-8C31 O-ring is product number 8 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement part. Drive side rear 5mm quick release spacer for Micro Spline, will fit most 240, 350 and 370 hubs. Check support section of DT Swiss.com for compatability.
Genuine DT Swiss replacement rear axle. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement bearing. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement part.
SW-M8050 A lever right hand is product number 4 in the attached image. Genuine Shimano replacement part.
SW-M8050 B lever right hand is product number 5 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine Shimano replacement part.
FH-M8110 right hand ball retainer, 3/16"" x 13 mm is product number 3 in the attached image. Genuine Shimano replacement part.
H-P flange nut 3/8 is product number 11 in the attached image. Genuine Shimano replacement part.
