Collection
SL-M5130-R10 right hand shifting lever unit is product number 1 in the attached image. Genuine Shimano replacement part.
SL-M6100 right hand shifting lever unit is product number 1 in the attached image. Genuine Shimano replacement part.
WH-R9270-C36-TL-F valve unit is product number 11 in the attached image. Genuine Shimano replacement part.
ST-R8050 left hand bracket unit is product number 10 in the attached image. Genuine Shimano replacement part.
WH-R9200-C50-TU-R left hand cone is product number 8 in the attached image. Genuine Shimano replacement part.
FH-MT901-B complete hub axle, 148 mm is product number 1 in the attached image. Genuine Shimano replacement part.
RD-M9000 bracket axle unit for normal type is product number 1 in the attached image. Genuine Shimano replacement part.
SG-3R40 driver unit is product number 7 in the attached image. Genuine Shimano replacement part.
RD-M8150-11 bracket axle unit is product number 1 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Genuine DT Swiss replacement part. Converts into 5 mm Q/R, will convert 142 x 12 mm ratchet EXP road hubs with SRAM XDR road freehubs to 135 mm quick release.
FH-TX505 complete hub axle, 146 mm is product number 2 in the attached image. Genuine Shimano replacement part.
WH-R9200-C50-TU-F complete quick release, 133 mm is product number 1 in the attached image. Genuine Shimano replacement part.
SM-BH90 2.1 mm bore olive and connecter insert is product number 2 in the attached image. Genuine Shimano replacement part.
WH-6800-F left hand lock bolt unit is product number 5 in the attached image. Genuine Shimano replacement part.
FC-R9200-P top cover is product number 9 in the attached image. Genuine Shimano replacement part.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Genuine DT Swiss replacement front axle. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part. Drive side spacer for 130 or 135 mm use with a SRAM XDR freehub. Check DT Swiss tech documents for your hub for compatibility.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Genuine DT Swiss Ratchet LN freehub and end cap for DT 370 hubs equipped with Ratchet LN. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
WH-MT500-CL-R12-B-29 complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
