Collection
WH-R9200-C50-TU-R stop ring is product number 7 in the attached image. Genuine Shimano replacement part.
WH-R9200-C50-TU-R complete quick release, 163 mm is product number 1 in the attached image. Genuine Shimano replacement part.
FH-M9111 outer seal ring is product number 8 in the attached image. Genuine Shimano replacement part.
RD-M9000 bracket axle 2 for direct mount type is product number 2 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
WH-R9200-C50-TU-F nipple is product number 8 in the attached image. Genuine Shimano replacement part.
RD-M8150-11 bracket axle unit is product number 1 in the attached image. Genuine Shimano replacement part.
Reliable, highly rigid E-thru I-Type axle for 142 x 12 mm Shimano hubs I-Type design with integrated adjuster nut into the right hand lever housing Hollow axle design.
Reliable, highly rigid E-thru I-Type axle for 148 x 12 mm Shimano hubs I-Type design with integrated adjuster nut into the right hand lever housing.
Genuine DT Swiss replacement part. Converts into 5 mm Q/R, will convert 142 x 12 mm hubs to 135 mm and 148 x 12 mm Boost hubs to 141 mm.
Genuine DT Swiss replacement part. Converts a rear ratchet EXP road hub into a 142 x 12 mm thru-axle for Shimano Road HG cassettes. End caps.
Genuine DT Swiss replacement part. Converts into 5 mm Q/R, will convert 142 x 12 mm ratchet EXP road hubs with standard Campagnolo road freehubs to 135 mm quick release.
SG-3R40 sprocket wheel, 16T is product number 34 in the attached image. Genuine Shimano replacement part.
FH-M4050 complete hub axle, 146 mm is product number 2 in the attached image. Genuine Shimano replacement part.
BR-MT520 Pad spacer is product number 24 in the attached image. Genuine Shimano replacement part.
BL-M9100 lever axle is product number 2 in the attached image. Genuine Shimano replacement part.
SM-BC06 bell crank unit is product number 30 in the attached image. Genuine Shimano replacement part.
FC-RX600 left hand crank arm, 165 mm is product number 2 in the attached image. Genuine Shimano replacement part.
FC-R9200 ring L is product number 5 in the attached image. Genuine Shimano replacement part.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Genuine DT Swiss replacement part. Drive side spacer for 130 or 135 mm use with a SRAM XDR freehub. Check DT Swiss tech documents for your hub for compatibility.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Genuine DT Swiss Ratchet LN freehub and end cap for DT 370 hubs equipped with Ratchet LN. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
