Collection
SG-S500 right hand dust cap A with seal is product number 18 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement part. Converts into 5 mm Q/R, will convert 142 x 12 mm ratchet EXP road hubs with standard Campagnolo road freehubs to 135 mm quick release.
SG-S7000-8 Alfine left hand cone with dust cap and seal ring is product number 14 in the attached image. Genuine Shimano replacement part.
SM-BH90 2.1 mm bore olive and connecter insert is product number 2 in the attached image. Genuine Shimano replacement part.
FC-S500 Alfine chainguard for 45 tooth ring is product number 16 in the attached image. Genuine Shimano replacement part.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibility. Ideal for MTB use and for rotors up to 203 mm. Lighter than the 6 bolts used to mount to a 6-bolt hub!.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
FC-MT610-2 left hand crank arm unit is product number 2 in the attached image. Genuine Shimano replacement part.
SL-M6100-I right hand bracket unit with OGD type is product number 11 in the attached image. Genuine Shimano replacement part.
FH-M788 complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
SG-8C31 right hand dust cap A with seal is product number 3 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
FH-M8110 left hand lock nut is product number 6 in the attached image. Genuine Shimano replacement part.
CJ-8S20 cassette joint unit is product number 36 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement bearing. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front EXP 180 and 240 hubs to work with Rockshox Torque Cap compatible forks. Fits EXP 180 and 240 hubs as well as MY2020 - 2023 1200 wheels and MY2021 and onwards 1501 wheels.
Genuine DT Swiss replacement bearing. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
HB-M618 hub axle unit is product number 9 in the attached image. Genuine Shimano replacement part.
SG-C3000-7R ring gear unit 2 is product number 5 in the attached image. Genuine Shimano replacement part.
SG-8R31 right hand cone with seal is product number 20 in the attached image. Genuine Shimano replacement part.
RD-M8000 B-axle 2 for direct mount type is product number 2 in the attached image. Genuine Shimano replacement part.
