Collection
The DT Swiss XM 481 rim has a full 30 mm internal profile, ideal for running high-volume rubber at low pressures. Strength Boost Welding Technology creates a perfectly welded join for a durable, reliable rim.
RD-M985 P-axle unit and washer is product number 10 in the attached image. Genuine Shimano replacement part.
SG-C7050-5D internal assembly axle length, 187 mm is product number 1 in the attached image. Genuine Shimano replacement part.
ST-R3000 left hand name plate and screw is product number 2 in the attached image. Genuine Shimano replacement part.
ST-R3000 left hand main lever support is product number 3 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
ST-4720 right hand name plate & fixing screw is product number 1 in the attached image. Genuine Shimano replacement part.
HB-M770 S ball retainer is product number 5 in the attached image. Genuine Shimano replacement part.
SG-7R45 Nexus ball retainer F 3/16 x 12 is product number 21 in the attached image. Genuine Shimano replacement part.
FH-HG20 complete axle 146 mm is product number 5 in the attached image. Genuine Shimano replacement part.
The Conquerors of Kona; victorious at the 2017, 2018, 2019, 2021, 2022 and 2023 Triathlon World Championships and proven in the World Tour peloton.
CJ-NX40 Cassette joint unit is product number 34 in the attached image. Genuine Shimano replacement part.
WH-RX31-F12 Complete hub axle is product number 1 in the attached image. Genuine Shimano replacement part.
SH10 red cleat fixed type 0 degree Walkable design with ground contacts points to prevent wearing of cleat.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
SL-6208 bracket is product number 2 in the attached image. Genuine Shimano replacement part.
FC-S500 top chain guard black for 45T is product number 16 in the attached image. Genuine Shimano replacement part.
WH-6800-R left hand dust cover is product number 12 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
Fixing bolt for mounting flat mount calliper to flat mount frame Bolt length 38mm for frame thickness 25mm please refer to the bolt reference chart Genuine Shimano replacement part.
Specifically designed for accurate measurement of spoke length. Cut-out sections allow spoke diameter to be measured.
Washers to increase durability of the spokes in a wheel. Fits between the inside of the spoke head and the flange of the hub. Minimises movement between spoke head and hub flange avoiding stress and weaknesses in the shoulder of the spoke.
Brass nipples for use with DT's PHR washers in compatible rims. DT's premium Squorx Pro Head® nipples combine ease of use, lightweight and optimum performance in a single product.
