Shimano

Reliable, highly rigid E-thru axle for 148 x 12 mm Shimano hubs Hollow axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal Designed for use with 148 x 12 mm frame dropouts.

Reliable, highly rigid E-thru axle for 142 x 12 mm Shimano hubs Hollow axle design Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal.

FC-RS510 left hand crank arm unit, 175 mm is product number 2 in the attached image. Genuine Shimano replacement part.

RD-M9100 outer plate assembly, GS is product number 17 in the attached image. Genuine Shimano replacement part.

RD-M9050 inner plate SGS is product number 18 in the attached image. Genuine Shimano replacement part.

SM-CRE50 44T double chain ring cover and fixing bolt is product number 7 in the attached image. Genuine Shimano replacement part.

Genuine Shimano replacement part.

Genuine Shimano replacement part.

FH-5800 complete quick release, 163 mm is product number 1 in the attached image. Genuine Shimano replacement part.

DH-S501 internal assembly, 108 mm is product number 3 in the attached image. Genuine Shimano replacement part.

ST-R9120 left hand unit cover L and fixing screw is product number 4 in the attached imageGenuine Shimano replacement part.

Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world.

Performance front hub for use with Disc and rim brakes, using Centre-Lock mounting system. Designed to be used with either Centre-Lock Disc rotor mount for secure hassle free setup or regular rim brake.

Great value front derailleur that delivers accurate and low-friction shiftingMulti-fit, Dual pull and top swing design. With the use of included adapters, the derailleur can be mounted to any size seat tube.

Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world. 10-speed front derailleur for fast and precise shifting performance.

Great value high performance 105 double Di2 front derailleur. The Di2 front derailleur's operation is pioneering, smooth shifting is guaranteed thanks to wireless communication with the gear levers.

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.

Highly efficient, super light weight, premium grade 6 volt 3 watt dynamo front hub for easy to use and rigid 12 mm axle fitment. Provides bright illumination for safer night riding without the need and expense of replacing batteries.

High quality, long lasting rear rack mounted lithium-ion battery pack for Shimano STEPS systems. 1000 charge cycles without significant power loss. Approximately four hours charge time. High 500Wh capacity (36V, 11.6Ah). Average weight 2700g.

Complete Ultegra level press-fit bottom bracket assembly for Shimano HollowTech II road cranks. Cups are made from fibre reinforced polymer material which reduces the risk of frame noise and damage.

To control the power mode on the STEPS drive unit use this left hand shifter. Should you get to a part of the trail where riding is not possible, you can active walk mode but pressing and holding the shifter down for assist up to 6kph.

Interchangeable, precision engineered disc calliper mount adapter. For post type disc callipers to be mounted to international standard frames with 180 mm disc rotors.

STEPS SM-BTE80 charging adapter for BT-E8030 / E8035.

Premium replacement resin coated hydraulic brake hose. Stiff reinforced hose that performs under pressure, keeping your brakes sharp. 2.1 mm bore diameter for excellent brake performance and response. Straight lever, banjo calliper connection.