Bike tools
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Professional tool kit for servicing all Ratchet EXP, Hügi ratchet and 3-Pawl DT Swiss Hubs.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Specially formulated in Switzerland to DT's specifications, this universal grease is an exceptionally high quality, teflon based lubricant for general servicing tasks.
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubs.
Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs.
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Bearing installation cylinder for front hubs wit 24 mm bearings. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Genuine Shimano replacement part.
65 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
35 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
TL-PD400 cone adjusting tool set is product number 6 in the attached image. Genuine Shimano replacement part.
Ring Nut tool required for removing and reinstalling the ratchet EXP Oversized ring nut with integrated inner ratchet.
Ring Nut tool required for removing and reinstalling the ratchet DEG ring nut. Only works on Ratchet DEG systems. Simple to use, fits into a vice for workshop use.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
Genuine Shimano replacement part.
TL-FH17A seal ring presser is product number 28 in the attached image. Genuine Shimano replacement part.
TL-CA100 cable tool is product number 8 in the attached image. Genuine Shimano replacement part.
Revised tool for installing the drive side hub shell seal on DT Ratchet hubs. Ensures the seal is aligned correctly and not damaged during installation, revised shape to fit over the oversized axles used on some Hybrid hubs.
