Bike tools

Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 42mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.

Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 44mm ID and 52mm OD. 1/2 thru hole to fit over our 1/2 threaded rod press handles.

Genuine Wheels Manufacturing Spare Designed for use with the Wheels Manufacturing Large Bearing Press.

Easy-to-use tool removes and installs replacement bushings Includes retaining tool, top cap and all three eyelet slammers Fits all eyelet sizes - 10mm, 12mm and 1/2.

Precision machined anodized aluminium tool designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.

E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring Centre clearance for E-Bike wiring is 0.812, with a 12-spline 23mm OD tool fitting.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration The gauge can measure everythig.

Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8 Press Rod and handles from Wheels Mfg This kit includes x1 3/8 ACME threaded rod, x2 30mm frame linkage standoffs and x2 threaded handles.

Complete tool kit for installing Wheels Manufacturing bottom brackets Kit includes our new bottom bracket socket tool for installing our bottom bracket cups, along with new sealed bearing drifts for 22mm, 24mm, 29mm and 30mm ID bearings.

Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.

A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames.

These extractors remove sealed bearings with inside diameters from 22mm, 24mm, 29mm, and 30mm Removes these sealed bearing sizes: 6806, 24x37, 29DUB, GXP22 Bearing extractors grip the inside race of a sealed bearing.

Bearing extractors set for pushing out 22mm, 24mm, 29, and 30mm ID sealed bearings from bottom bracket cups Compatible with the 1/2 threaded press rod and handles such as WMTL7 and WMTL7PRO.