Bike tools
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
This truing stand is a work of art! being completely machined from solid blocks of aluminium. Black with anodised red multilink-arms. Complete with adjustable mounting for all current bicycle wheels with surface-hardened steel guides.
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show up to 10 mm of run out.
Sealed bearing extractor for 22mm ID bearingsExtractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 17mm wrenches (for large sized extractors).
Headtube drifts for use with the Wheels Mfg Headset Cup Press 1/2 thru hole Drift is machined with multiple steps to fit common head tube inner diameters listed below Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 42mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 44mm ID and 52mm OD. 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Precision machined anodized aluminium tool designed to allow for easy adjustment of the Fox DHX2 and FLOAT X2 shocks requiring a 3mm and 6mm hex wrench This small pocket sized tool allows for easy trail side adjustments of rebound and compression.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames.
Introducing the new E-Bike Lockring Tool from Wheels Mfg Designed to save the mechanic time and money, the new e-bike lockring sockets are machined to match manufacturer specifications.
The Headset Press Pro Install Kit is a robust, and easy to use tool The kit includes a machined aluminium handle, 1/2 threaded rod, two machined aluminium drifts and the Adjustable Press Stop allowing for easy drift placement.
Vise Shaft Clamp Small - For small sized common axle and suspension components . Vise Shaft Clamp - Medium Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components.
Lezyne Tubeless Power XLarge Tyre Lever Yellow
Lezyne Smart Kit Box Tyre Patches (34 X 6 Patches)
