Bike tools
A simple adaptor to allow the use of a standard crank extractor tool with Shimano Octalink splined cranks.
MAHLE X35+ specific tool to open the drive unit.Mandatory to change the freewheel on the X35 system.Includes bolts.
This tool allows the removal of MAHLE bottom bracket bearings without disassembling them from the bike, significantly reducing the risk of damage and improving maintenance efficiency.
The EDC Tool Frame Kit includes the tool carrier plastic parts, tire leaver and storage capsule. The EDC Tool Frame Kit V2 is not compatible with the V1 (green) chainbreaker tool. KIT CONTAINS . Tire Lever. Sealed Storage Capsule(s).
The EDC Plug & Plier Kit is the perfect addition to the EDC V2 Tool .
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Ring Nut tool required for removing and reinstalling the ratchet EXP Oversized ring nut with integrated inner ratchet.
TL-CA100 cable tool is product number 8 in the attached image. Genuine Shimano replacement part.
TL-FC430 chainring installation tool for chainring for DU-EP801 / DU-EP600 is product number 7 in the attached image. Genuine Shimano replacement part.
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show up to 10 mm of run out.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
Tool kit set for servicing the bearings on radial 240 and 190 front hubs.
Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles.
Two sided splined socket tool for installing and removing both 48.5mm and 44mm 16-notch bb cupsWorks with 1/2" drive torque wrench3/8" drive adapter includedPrecision machined 6061 aluminium.
Sealed bearing extractor for 24mm ID bearings.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 39mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.
Similar to its big brother but at a fraction of the size The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
