Bike tools
Tough genuine Shimano tool.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
Ergonomic sprocket remover tool for 1-1/8 inch size sprockets. comfortable handle grip. For use with 1-1/8 sprockets.
Tough genuine Shimano tools. Hardened steel for longevity and durability.
Tooling to remove the MAHLE BB.(Mandatory to use when removing the BB, otherwise the electronics might break).
The EDC Plug Kit is the perfect addition to the EDC V2 Tool system. The Jabber Tool and bacon strips store perfectly within the small EDC capsule. What's in the Box . Tire Plug Jabber Tool. 15x Bacon Strips. Product Specs . Material: Aluminum/steel/bacon.
A stretch polyurethane strap with tail clip for neat and secure fastening of your spare tube or gear to your frame. Our strap doesn't absorb water and mud like a Velcro strap and won't scratch your frame. What's in the Box . 2x EDC Gear Tension Straps.
44 tooth ratchets and springs for OneUp Rear Hubs. Includes a packet of Dumondeâ„¢ Tech Pro X Freehub Grease.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
FC-R9100-P magnet setting tool is product number 13 in the attached image. Genuine Shimano replacement part.
35 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
Revised tool for installing the drive side hub shell seal on DT Ratchet hubs. Ensures the seal is aligned correctly and not damaged during installation, revised shape to fit over the oversized axles used on some Hybrid hubs.
Two sided splined socket tool for installing and removing both 48.5mm and 44mm 16-notch bb cupsWorks with 1/2" drive torque wrench3/8" drive adapter includedPrecision machined 6061 aluminium.
Sealed bearing extractor for 30mm ID bearingsExtractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
AXLE RULER - Plug Gauge . Tech Specs: Material: 6061 aluminum Hard anodized Avilable in Male and Female measurements: M9x1, M9x26, 3/8x24, 3/8x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.
Bearing extractors set for pushing out 22mm, 24mm, 29, and 30mm ID sealed bearings from bottom bracket cups Compatible with the 1/2 threaded press rod and handles such as WMTL7 and WMTL7PRO.
