Bottom Brackets
Replacement spacer pack for Wheels Mfg 29mm spindle (SRAM DUB) bottom brackets. Bearings sold separatelyPack Includes2 x Silicone Dust Seal, 29mm ID, 42mm OD2 x 0.5mm, 29mm ID Crank Spindle Spacer2 x 0.5mm, 29mm ID Crank Spindle Spacer.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 2.5mm spacers with a 29mm I.D.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 5mm thick spacers with a 29mm I.D.
BB30 service kit with x2 clips and x2 6806 Angular Contact Enduro bearings.
Run Shimano HollowTech-II cranks in your BB30 frameShims are based on industry standard BB30 bottom bracket shells. Easy to install and machined for exact fitShims press fit directly into BB30 bearings (6806).
Run SRAM / Truvativ cranks with 24/22mm axles in your BB30 frame. Easy to install and machined for exact fit. Shims press fit directly into BB30 bearings (6806)You will need the 6806 bearings already installed into the BB30 shell to start this conversion.
Run SRAM cranks in your 386EVO frameShims are based on industry standard 386EVO bottom bracket shells386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.
BB86/92 bottom bracket compatible with Praxis M30 cranks using a 28/30mm axleServiceable, double lip sealed ABEC-3 graded Enduro bearingsUSA machined aluminium shell for superior function and durabilityDirectly replaces all OEM BB86 products.
Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.
Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.
Thread together bottom bracket for frames using the BB. Right bottom bracket standard and SRAM DUB cranks with 29mm spindle diameter.
Run Shimano HollowTech-II cranks in your BB. Right frameShims are based on industry standard BB. Right bottom bracket shellsEasy to install and machined for exact fit.
Run SRAM cranks in your BBRight frame. Shims are based on industry standard BBRight bottom bracket shells. Easy to install and machined for exact fit.
BB86/92 bottom bracket Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability Directly replaces all OEM BB86 products.
By popular demand, we've added this PF30 with outboard bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames The two machined aluminium cups thread together keeping the bottom bracket stable in the frame.
Introducing the new anodized bottom brackets from Wheels Mfg .
Introducing the new anodized bottom brackets from Wheels Mfg .
Introducing the new anodized bottom brackets from Wheels Mfg .
Introducing the new anodized bottom brackets from Wheels Mfg .
Receiver cup for Wheels Mfg sealed bearing extractors Machined aluminium cup, anodized red with 60mm OD and 52mm ID. 1/2 thru hole to fit over our 1/2 threaded rod press handles.
The two machined aluminium cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance This means no more creaking, smoother operation, longer bearing life.
BB30 to outboard bottom bracket Eliminates the need for adapters Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability Threaded design for easy installation and removal.
BB86/92 Threaded Outboard bottom bracket with Angular Contact Bearings Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability Directly replaces all OEM BB86 products.
Standard threaded bottom bracket Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability English thread.
