Bottom Brackets

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranksKit consists of 5, 5mm thick spacers with a 29mm I.D.

BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips.

BB30 service kit with x2 clips and x2 6806 Angular Contact Enduro bearings.

Run Shimano HollowTech-II cranks in your BB30 frameShims are based on industry standard BB30 bottom bracket shells. Easy to install and machined for exact fitShims press fit directly into BB30 bearings (6806).

Run SRAM / Truvativ cranks with 24/22mm axles in your BB30 frame. Easy to install and machined for exact fit. Shims press fit directly into BB30 bearings (6806)You will need the 6806 bearings already installed into the BB30 shell to start this conversion.

Run SRAM cranks in your 386EVO frameShims are based on industry standard 386EVO bottom bracket shells386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.

Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.

Introducing the new anodized bottom brackets from Wheels Mfg !!BB86/92 Outboard featuring ABEC-3 graded bearings to suit 24mm axle cranks. Serviceable, double lip sealed, Enduro bearings.

Our solution for running a 29mm spindle crankset (SRAM DUB) in a BSA threaded frameMachined aluminium cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shellFully serviceable.

Run Shimano HollowTech-II cranks in your BB. Right frameShims are based on industry standard BB. Right bottom bracket shellsEasy to install and machined for exact fit.

T47 threaded bottom bracket cups for T47 frames and 29mm spindle diameter SRAM DUB cranks. Cups have outboard bearings, and can be used in bottom bracket shells with widths from 68mm to 100mm.

Introducing the new anodized bottom brackets from Wheels Mfg !!Standard threaded bottom bracket cups to suit 24mm axle cranks.

Introducing the new anodized bottom brackets from Wheels Mfg !!Standard threaded bottom bracket cups to suit 24mm axle cranks.

Introducing the new anodized bottom brackets from Wheels Mfg !!Standard threaded bottom bracket cups to suit 24mm axle cranks.

Introducing the new anodized bottom brackets from Wheels Mfg .

Introducing the new anodized bottom brackets from Wheels Mfg .

Replacement Angular Contact Bearing for Trek BB90 bottom brackets Featuring an internal diameter of 24mm and an external diameter of 37mm High quality steel cartridge bearings for a high quality repair.

Our solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.

Replacement spacer pack for Wheels Mfg 24/22mm (GXP) bottom brackets. Individual bearings sold separately Pack Includes: 1 x Silicone Dust Seal, 24mm ID Drive Side 1 x Silicone Dust Seal, 22mm ID Non-drive Side 1 x 24mm Wave Washer 2 x 0.

PressFit 30 to outboard bottom bracket for use with SRAM 24mm/22mm cranks Eliminates the need for adapters Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability.

PressFit 30 to outboard bottom bracket with angular contact bearings for use with SRAM 24mm/22mm cranks Eliminates the need for adapters Serviceable, double lip sealed Enduro bearings USA machined aluminium shell for superior function and durability.

Run Shimano HollowTech-II cranks in your SRAM PressFit 30 BBShims are based on industry standard PF30 bottom bracket shells. Easy to install and machined for exact fit.

T47 threaded bottom bracket cups for T47 frames and 29mm spindle diameter SRAM DUB cranks. Cups have internal bearings, and can be used in bottom bracket shells with widths from 68mm to 132mm.

FSA BB-4000 bottom bracket for Omega Drive, BSA to MegaExo 19mm. Durable, smooth, and reliable for efficient pedaling.