Collection

Replacement spacer pack for Wheels Mfg 24mm bottom brackets. Individual bearings sold separately Pack includes: 2 x Silicone Dust Seal, 24mm ID 2 x 0.5mm, 24mm ID Crank Spindle Spacer 2 x 2 - 1.0mm, 24mm ID Crank Spindle Spacer.

Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 39mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.

Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 42mm ID and 52mm OD 1/2 thru hole to fit over our 1/2 threaded rod press handles.

Receiver cup sleeve for Wheels Mfg sealed bearing extractors Machined aluminium sleeve, anodized red with 44mm ID and 52mm OD. 1/2 thru hole to fit over our 1/2 threaded rod press handles.

Transform Your Ride with Unmatched Simplicity and Performance. Are you ready to simplify your cycling setup and enhance your riding experience? Look no further than the all-new SOLO-SPLINE Single Speed Conversion Kit from Wheels Manufacturing.

Solo-XD 18 Tooth Cog, 7075 aluminum, Red.

T47A (asymmetrical) threaded bottom bracket cups for T47A frames and 30mm diameter spindle compatible cranks The cups have internal bearings and can be used in bottom bracket shells with widths from 77.

T47A (asymmetrical) threaded bottom bracket cups for T47A frames and 29mm diameter spindle compatible cranks The cups have internal bearings and can be used in bottom bracket shells with widths from 77.

Introducing the new anodized bottom brackets from Wheels Mfg .

Introducing the new anodized bottom brackets from Wheels Mfg .

Introducing the new anodized bottom brackets from Wheels Mfg .

Precision machined anodized aluminium tool designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt.

E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring Centre clearance for E-Bike wiring is 0.812, with a 12-spline 23mm OD tool fitting.

AXLE RULER - PRO . Axle Ruler Pro Feast your eyes on the Axle Ruler Pro - the precision tool that's about to revolutionize your bike mechanic game.

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration The gauge can measure everythig.

Complete tool kit for installing Wheels Manufacturing bottom brackets Kit includes our new bottom bracket socket tool for installing our bottom bracket cups, along with new sealed bearing drifts for 22mm, 24mm, 29mm and 30mm ID bearings.

Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in The Bearing Press Pro Kit replaces that archaic installation system, providing the right tool for the job.

A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames This single-sided socket is used for installing and removing 48.

A Thin Flange Bottom Bracket Socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames This single-sided socket is used for installing and removing Praxis T47 bottom brackets.

Bearing extractors set for pushing out 22mm, 24mm, 29, and 30mm ID sealed bearings from bottom bracket cups Compatible with the 1/2 threaded press rod and handles such as WMTL7 and WMTL7PRO.

This drift and over axle set is used to install common-sized thru-axle hub and frame sealed bearings Compatible with the 3/8 Wheels Mfg kits such as WMTLBBPPK, WMTLBBPEK and WMTL4083.

Introducing the new E-Bike Lockring Tool from Wheels Mfg Designed to save the mechanic time and money, the new e-bike lockring sockets are machined to match manufacturer specifications.

Introducing the new E-Bike Lockring Tool from Wheels Mfg Designed to save the mechanic time and money, the new e-bike lockring sockets are machined to match manufacturer specifications.

These extractors remove sealed bearings with inside diameters from 8mm,9mm,10mm and12mm Removes these sealed bearing sizes: 608, 609, 6000, 6001 Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub.