Collection
The Alfine 8 speed Di2 specification internal gear hub runs on needle bearings for increased durability and high drive efficiency. Top normal internal structure for improved tolerance when shifting while riding under load.
The Alfine 11 speed internal gear hub runs on needle bearings for increased durability and high drive efficiency.
The Alfine 8 speed internal gear hub runs on needle bearings for increased durability and high drive efficiency. Top normal internal structure for improved tolerance when shifting while riding under load.
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine Di2 specific hub with EW-SD300 wire connection.
Alfine Di2 8-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 8-speed Alfine SG-S7051 Di2 specific hub.
Alfine Di2 11-speed motor unit. The motor unit is required to quickly and smoothly actuate the shift signal sent by you pressing the shifter button. For use with 11-speed Alfine SG-S7051 Di2 specific hub.
Alfine 6 volt 3 watt dynamo front hub with easy to use Centre-Lock disc brake mount. Provides bright illumination for safer night riding without the need and expense of replacing batteries.
Alfine series disc brake system gives you plenty of power when you require it. For use with mineral oil which is non-corrosive and less hazardous than conventional hydraulic fluid.
High quality 8-speed cassette. Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load.
Light wire to connect front and rear lights to the X35+ system.Light wire will fit the battery connector.Open strand interface for light connection.
Plastic cable protection shield for the X35 motor cable.Prevents the cable to get damaged by the disc rotor during use or installation.
Replacement Mahle Freewheel Set compatible with Campagnolo N3W.Includes right end cap and spacer.Body Material: Aluminium.
Freewheel Set compatible to SRAM XDR Alu. Includes right end cap and spacer.
Freewheel Set compatible to Shimano MicroSpline Alu. Includes right end cap and spacer.
Freewheel Set compatible to Shimano HG Alu. Includes right end cap and spacer.
Light wire to connect front lights, daylight and rear lights to the X35+ system.Light wire will fit the battery connector.Open strand interface for light connection.
This tool allows the removal of MAHLE bottom bracket bearings without disassembling them from the bike, significantly reducing the risk of damage and improving maintenance efficiency.
Allows GXP in 24 mm for MAHLE BB86, BB92 and PF46-24.
Magnet ring fixing the freewheel to communicate with the PAS Sensor. Compatible with cassettes of 12 speeds.
Design to deliver maximum power in minimal time. Compatible with X20 and X30 Systems.
The new Active Charger includes CAN BUS for real time communication with the battery. This direct communication, combined with a more powerful converter, allows the battery to be charged at different intensities from 0 to 4.
