Collection
FC-RS510 left hand crank arm unit, 175 mm is product number 2 in the attached image. Genuine Shimano replacement part.
The new RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
This truing stand is a work of art! being completely machined from solid blocks of aluminium. Black with anodised red multilink-arms. Complete with adjustable mounting for all current bicycle wheels with surface-hardened steel guides.
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show up to 10 mm of run out.
The Ratchet LN upgrade kit enables the conversion of DT Swiss 3-pawl hubs to the renowned DT Ratchet freehub system. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
BT-E8020 CG port cap assembly is product number 1 in the attached image. Genuine Shimano replacement part.
ST-9000 right hand main lever support is product number 2 in the attached image. Genuine Shimano replacement part.
RD-M9100 bumper is product number 18 in the attached image. Genuine Shimano replacement part.
RD-M9100 bracket axle unit is product number 1 in the attached image. Genuine Shimano replacement part.
RD-M9050 P-seal ring is product number 9 in the attached image. Genuine Shimano replacement part.
FC-S500 top chain guard black for 45T is product number 16 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
SL-M6000 left hand bracket and fixing bolt, for with indicator type is product number 7 in the attached image. Genuine Shimano replacement part.
FH-M4050 complete quick release, 173 mm is product number 1 in the attached image. Genuine Shimano replacement part.
FH-T610 complete quick release, 168 mm is product number 1 in the attached image. Genuine Shimano replacement part.
Specifically designed for accurate measurement of spoke length. Cut-out sections allow spoke diameter to be measured.
Washers to increase durability of the spokes in a wheel. Fits between the inside of the spoke head and the flange of the hub. Minimises movement between spoke head and hub flange avoiding stress and weaknesses in the shoulder of the spoke.
A roll of solder for use on wheels that are tied and soldered. Improved formula for joining stainless steel. Does not dull, and remains bright when cooled.
A treatment for nipples that prevents spokes from loosening when riding. Locks the nipples onto the spokes. Temperature stable. Still allows nipples to be turned for truing once set.
Dedicated low pressure sealant for optimum performance in tyres run at under 60 PSI. Offroad formulation designed to quickly seal holes up to 6mm. Ammonia and latex free. larger 1000 ml bottle for regular tubeless users.
