Collection
WH-M8100-TL-F15-B-29 complete hub axle is product number 2 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
BL-M7100 left hand lever member unit is product number 3 in the attached image. Genuine Shimano replacement part.
BL-M8100 left hand lever member unit is product number 4 in the attached image. Genuine Shimano replacement part.
SM-CRE80 44T double chain guard unit is product number 15 in the attached image. Genuine Shimano replacement part.
ST-R8000 lever axle and E-ring is product number 4 in the attached image. Genuine Shimano replacement part.
FH-M810 ball retainer 3/16 is product number 4 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement front axle spacer.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
Ideal for the rider who wants a super tough and full, 30 mm wide Enduro rim but would rather bust berms than their budgets.
BR-M987 bleed nipple and seal ring is product number 10 in the attached image. Genuine Shimano replacement part.
CS-M7000 lock ring and spacer is product number 1 in the attached image. Genuine Shimano replacement part.
ST-R8000 bracket cover pair is product number 12 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TU-R complete freewheel body is product number 10 in the attached image. Genuine Shimano replacement part.
SH10 red cleat fixed type 0 degree Walkable design with ground contacts points to prevent wearing of cleat.
FC-RS510 left hand crank arm unit, 175 mm is product number 2 in the attached image. Genuine Shimano replacement part.
The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles. This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things.
The RWS system from DT Swiss revolutionises the way we attach our wheels by doing away with the cam system. The RWS axle and lever are connected and clamping force is applied simply by turning the lever.
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
BT-E8020 frame CG port cap is product number 2 in the attached image. Genuine Shimano replacement part.
SL-6208 bracket is product number 2 in the attached image. Genuine Shimano replacement part.
WH-R9270-C50-TU-R left hand spoke, 255 mm is product number 22 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
