Collection
Genuine Shimano replacement part.
SG-S700 seal ring I is product number 36 in the attached image. Genuine Shimano replacement part.
SG-8C31 right hand dust cap A with seal is product number 3 in the attached image. Genuine Shimano replacement part.
SG-8C31 O-ring is product number 8 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front hubs to work with Rockshox Torque Cap compatible forks. Fits older, white 180 hubs and pre 2021, 240 hubs.
Genuine DT Swiss replacement part. Drive side rear 5mm quick release spacer for Micro Spline, will fit most 240, 350 and 370 hubs. Check support section of DT Swiss.com for compatability.
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement rear axle. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement part. Fits both twin Ratchets and Ratchet EXP.
WH-R9170-C60-TU-R12 ball retainer, 3/16"" is product number 4 in the attached image. Genuine Shimano replacement part.
RD-M8050 bracket axle unit is product number 1 in the attached image. Genuine Shimano replacement part.
H-P flange nut 3/8 is product number 11 in the attached image. Genuine Shimano replacement part.
BL-M640 left hand lid is product number 3 in the attached image. Genuine Shimano replacement part.
CJ-NX10 Nexus cassette joint unit is product number 40 in the attached image. Genuine Shimano replacement part.
ST-7900 tool A for E-ring is product number 13 in the attached image. Genuine Shimano replacement part.
ST-7900 tool B for E-ring is product number 14 in the attached image. Genuine Shimano replacement part.
Genuine DT Swiss replacement front axle. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubs. Includes drift and guide to ensure perfect alignment when working on these hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Replacement axle disassembly tool for 15 mm axles.
CS-6600 sprocket 17T is product number 10 in the attached image. Genuine Shimano replacement part.
ST-4700 unit cover and fixing screw, left hand is product number 11 in the attached image. Genuine Shimano replacement part.
Genuine Shimano replacement part.
