Collection
Genuine Shimano replacement part.
Genuine Shimano replacement part.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
DT Ratchet DEG ratchet service kit, contains both 90 tooth ratchets, both springs, a freehub spacer and a tub of DT's specially formulated molykote TP 42 ratchet grease.
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibility. Ideal for MTB use and for rotors up to 203 mm. Lighter than the 6 bolts used to mount to a 6-bolt hub!.
Genuine DT Swiss replacement front axle. Please see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs. .
Genuine DT Swiss replacement part.
DT Ratchet EXP Oversized ratchet service kit for high end EMTB Hybrid hubs, contains both 30 tooth ratchets, the spring and a tub of DT's specially formulated molykote TP 42 ratchet grease.
Professional tool kit for servicing all Ratchet EXP, Hügi ratchet and 3-Pawl DT Swiss Hubs.
Genuine DT Swiss replacement part.
Genuine DT Swiss replacement part. Converts BOOST 110 x 15 mm front EXP 180 and 240 hubs to work with Rockshox Torque Cap compatible forks. Fits model year 2024 and onwards XRC 1200 wheels.
Genuine DT Swiss replacement part. 10.1 mm axle spacer for 3-pawl hubs.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Genuine DT Swiss replacement part. Drive side spacer for 130 mm DiCut road hub.
Installation cylinder for working on 350 and 370 front hubs. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Designed for DT's Hybrid E-MTB wheels, these steel 24 Tooth ratchets are super tough and ideal for use on E-bikes, tandems or any bike that sees sustained high-torque and where reliability is paramount. Compatible with all DT star ratchet based hubs.
Shim ring for Ratchet EXP hubs only, will not fit older designs. Dimensions: Outer / Inner diameter 25.9 / 19.9 X 2.3 mm.
Genuine DT Swiss replacement part. Converts a Boost 20mm front hub into Boost 15 mm thru-axle. Please refer to the DT Swiss Tech Book for a full chart of possible conversions for wheelsets and individual hubs.
Single cylindrical ratchet spring for Ratchet EXP hubs only, will not fit older designs.
Axle spacer for Ratchet EXP hubs only, will not fit older designs.
Genuine DT Swiss Ratchet LN freehub and end cap for DT 370 hubs equipped with Ratchet LN. Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area.
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap. 3-Pawl freehub as found on many DT complete wheels.
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap. 3-Pawl freehub as found on many DT complete wheels.
