Stems
Extend or decrease your reach to obtain the optimal position for your road, mtb or hybrid bike
The LOOK DESIGN stem is made from 3D forged aluminum. Available in various lengths with a -7° angle. Structure: Aluminium. Construction type: AL 6061 T6 3D Forged & machined, Torx Screws. Weight: 210 g for 100 mm.
At just 136 grams for the 100mm version, the Zero Stem is designed to minimize weight without compromising durability.
Threadless conversion for threaded forks allowing a larger range of modern stems to be fitted to older bikesConverts a 1 inch quill stem bike to accept 1-1/8 inch threadless stems.
60mm 35 degrees stem is considered a short stem for bringing the handlebars closer to reduce reach distance.
The zero1 stem is the perfect combination of stiffness, lightness and aero shape. The zero1 stem is made of 6061 aluminum
Adjustable stem with -30 to +40 degree adjustment. It is compatible with all 1-1/8 a-head forks (the most common forks on the market).
The LS2 stem is our all-rounder for every cyclist. Available in various lengths with a -7° angle. Specifications: Construction type: 3D Forged 6061. Structure: Alloy. Weight: 135 g for 100 mm. Lenghts: -7°, 90 mm I -7°, 100 mm -7°, 110 mm I -7°, 120 mm.
Steeper angle stem to bring handlebars higher. A-head type. 35 degrees angle.
These spacers let you raise your OneUp Direct Mount Stem by 5mm or 10mm.
This carbon stem is adjustable for angle and uses a band clamp to keepThe bars in place while keepingThe aero profile.
Secure adjustable 4-bolt quill stem. Made from high quality 6061 alloy. Heat treated for extra strength. Satin black finish for high quality look and feel. 115mm in length. Suits 1 1/8" threaded steerer and 31.8mm bar bore.
A no nonsense handlebar stem, simple, elegant with a lightweight design that can be run in the negative or positive position. Features: CLAMP : 31.8mm. MATERIAL : 3D Forged 6061-T6 Aluminium. WEIGHT : 162g (for the 100mm). RISE : -17 / +17 degree.
A split aluminium shim that fits over a 25.4 mm (1 inch) steerer tube changing the outer dimension to 28.6 mm (1-1/8 inch). Allows the use of a stem designed to fit 1-1/8 inch steerer tubes where greater choice is available.
The PRO Koryak Stem is designed for use with the PRO Koryak Handlebar and provides three length options to help you perfect your mountain bike fit. . The perfect mountain bike fit is more accessible thanks to the PRO Koryak Stem.
Made of aluminum with a matte black finish,The LS1 stem is reversible and offers an inclination of plus or minus 6°. It is available in 4 lengths (90 to 120 mm) for an optimal bike fit. Structure: Aluminium.
Crafted from 3D forged, one-piece construction, combining durability with a polished aesthetic.
The new Zipp Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The 8g-aluminum cap and 9g-bolt are the same as those used on bikes built for Zipp-sponsored professional teams.
Stem bolt kit. Kit contains . 4x m5x0.8x15mm socket head cap screws. 2x m6x1x16mm socket head cap screws.
Your handlebar's best friend. The OneUp Stem is designed for everything from trail riding to enduro racing and freeride. Its efficient use of material leads to sleek lines that are structural and aesthetic. Get more from your stem. Objectively Very Good.
