Products tagged with DT Swiss Bike tools
Bearing installation cylinder for front hubs wit 24 mm bearings. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles.
Specially formulated in Switzerland to DT's specifications, this universal grease is an exceptionally high quality, teflon based lubricant for general servicing tasks.
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubs.
Tool for removing the threaded cap on certain DiCUT wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Ring Nut tool required for removing and reinstalling the ratchet EXP Oversized ring nut with integrated inner ratchet.
A hexagonal nipple key from the masters of spokes. Fits DT Swiss hexagonal head nipples and allows nipples to be tensioned from the inside of the rim.
Workshop tool kit for all Hügi ratchet hubs such as the Pre-EXP 240 and the 350. Also works with 370 hubs that have Ratchet LN systems installed. Contains all the specialist tools required for servicing DT's most common hub internals.
Replacement axle disassembly tool for 15 mm axles.
65 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
35 mm bearing installation and removal cylinder. Please consult your wheel's service manual before ordering this tool to see whether it is required.
Workshop tool kit for replacing the ratchets and bearings in most Ratchet EXP 240 and 180 rear hubs.
Long square nipple driver for wheels with square hidden nipples up to 80 mm deep. Adjustable depth guide.
Adaptor for using Lefty Hubs in the DT Proline professional truing stand.
A special tool for holding Aerolite bladed spokes whilst wheel building or truing. Holds bladed spoke securely and allows nipples to be tensioned. Designed to be used in conjunction with TLDT108 nipple wrench.
This truing stand is a work of art! being completely machined from solid blocks of aluminium. Black with anodised red multilink-arms. Complete with adjustable mounting for all current bicycle wheels with surface-hardened steel guides.
A super light and portable aluminium spoke tool, ideal for tourers and bike packers. Includes standard spoke interface, alongside a torx nipple interface and a slot for holding aero spokes. makes a great keyring, never ride without it!.
A perfect fit for the square interface hidden nipples found on many high end aero and carbon wheelsets, including DT's.
An invaluable tool for getting the correct spoke tension during wheel building. Makes sure that spoke tension is tight and even, which is the key to successful wheel building. Fits all shapes of spokes. Accurate digital readout.
A classic nipple key design from the masters of spokes. Fits securely onto the flats of the nipple and allows nipples to be tensioned. Designed and developed to prevent rounding of the nipple flats. Red.
A tool to simplify the lacing of wheels, by holding the nipple. Simply clip the nipple onto the end of the tool and feed it through the rim. Perfect for deep section rims where access is limited.
Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles.
Professional tool kit for servicing all Ratchet EXP, Hügi ratchet and 3-Pawl DT Swiss Hubs.
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels. Please consult your wheel's service manual before ordering this tool to see whether it is required.
